{"title":"Pre-Order","description":"","products":[{"product_id":"darth-vader-pad-printed-figure-pre-order","title":"Darth Vader - Pad Printed Figure Pre-Order","description":"\u003cp\u003eAV Figures is excited to be collaborating with Cobalt Custom Bricks and NanoRex Designs! We are proud to announce our first pad printed figure pre-order: Darth Vader.\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 degree pad-printing\u003c\/li\u003e\n\u003cli\u003eTwo custom injection molded three-piece helmets in black, which feature detailed decorations, with pad-printed elements\u003c\/li\u003e\n\u003cli\u003eOne custom injection molded three-piece helmet in translucent blue, as a pre-order bonus\u003c\/li\u003e\n\u003cli\u003eInjection molded shoulder armor with decorated features\u003c\/li\u003e\n\u003cli\u003eTwo custom cloth capes\u003c\/li\u003e\n\u003cli\u003eA custom injection molded lightsaber hilt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere will be one head.\u003c\/p\u003e\n\u003cp\u003eThe injection molded parts will be molded in steel molds, like how official parts are also manufactured.\u003c\/p\u003e\n\u003cp\u003eIt will be printed on official parts. It will also come with a collector card.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: While the renders show two figures next to each other, please bear in mind that the final product only contains one figure. The renders only have two figures to show the front- and back side at the same time.\u003c\/p\u003e\n\u003cp\u003eAs with any collaboration, a portion of the profits is attributed to the designer(s) involved! Pre-ordering this figure will help support Cobalt and Nano as they continue to make new and exciting products for the community to enjoy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe estimated production time is roughly 6 months.\u003c\/strong\u003e Please be aware that this is an estimate, and the final shipping date may vary. The printing and injection molding  is outsourced to trusted manufacturers, but is subject to potential production delays like Chinese New Year.\u003c\/p\u003e\n\u003cp\u003eBy default, we will not ship the other items in your order until the pre-order is ready-to-ship.\u003c\/p\u003e\n\u003cp\u003eTo avoid delays, please place your pre-order separately from your normal site order. If you do combine them and later decide that you would like your non-pre-order items to ship separately, simply send an email to support@avfigures.com, and we will separate them for you. We will have to charge a separate shipping fee for this, but the option is always there if needed.\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":40622158807122,"sku":"","price":109.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/3C253EE3-AF2C-4418-829A-2A4624767C21.jpg?v=1700794412"},{"product_id":"darth-vader-expansion-packs-pre-order","title":"Darth Vader Expansion Packs Pre-Order","description":"\u003cp data-mce-fragment=\"1\"\u003eAV Figures is excited to be collaborating with Cobalt Custom Bricks and NanoRex Designs f\u003cspan data-mce-fragment=\"1\"\u003eor our next pre\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e-order\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e, the Darth Vader expansion packs\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eExpansion pack one features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eHayden Face (light nougat)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCracked injection-molded helmet, with decorated elements\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTattered cloth cape\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpansion pack two features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eHayden Face, ANH (tan)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eANH torso and arms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLegs without printed waistcape pattern\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom injection molded shoulder armor, with detailed decorations\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCloth Waistcape\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLightsaber hilt in ANH-style\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUpgrade your current Vader figures with these expansion packs, or combine them to create multiple Vader variants! Possible combinations for these can be:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion 1 + Expansion 2 = OWK Battle Damaged Vader\u003c\/li\u003e\n\u003cli\u003eExpansion 2 + Full figure (pre-orders closed) = ESB and ANH Vader\u003c\/li\u003e\n\u003cli\u003eExpansion 1 + Expansion 2 + Full Figure = ESB, ANH, \u003cem\u003eand\u003c\/em\u003e OWK Vader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe injection molded parts will be molded in CNC-milled steel molds\u003cspan\u003e, like how official parts are also manufactured\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e It will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e- and leg parts\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: While some of the renders show two figures next to each other\u003c\/span\u003e\u003cspan\u003e, please bare in mind that the final product only contains the items listed above\u003c\/span\u003e\u003cspan\u003e, for each respective expansion\u003c\/span\u003e\u003cspan\u003e. Some of the renders only have two figures to show the front\u003c\/span\u003e\u003cspan\u003e- and back side at the same time\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eThese are digital renders for previews\u003c\/span\u003e\u003cspan\u003e, the final product may change\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eAs with any collaboration\u003c\/span\u003e\u003cspan\u003e, a portion of the profits is attributed to the designer\u003c\/span\u003e\u003cspan\u003e(s\u003c\/span\u003e\u003cspan\u003e) involved\u003c\/span\u003e\u003cspan\u003e! Pre\u003c\/span\u003e\u003cspan\u003e-ordering this figure will help support Cobalt and Nano as they continue to make new and exciting products for the community to enjoy\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThe estimated production time is roughly 6 months.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ePlease be aware that this is an estimate, and the final shipping date may vary. The printing and injection molding  is outsourced to trusted manufacturers, but is subject to potential production delays like Chinese New Year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe production for the expansion units will not happen at the same time as the original, full figure pre-order. We cannot combine the shipment of the original pre-order with the expansions because they are being manufactured separately and independently from the original full figure.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBy default, we will not ship the other items in your order until the pre-order is ready-to-ship.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo avoid delays, please place your pre-order separately from your normal site order. If you do combine them and later decide that you would like your non-pre-order items to ship separately, simply send an email to support@avfigures.com, and we will separate them for you. We will have to charge a separate shipping fee for this, but the option is always there if needed.\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Expansion 1","offer_id":40700452175954,"sku":"","price":29.97,"currency_code":"USD","in_stock":false},{"title":"Expansion 2","offer_id":40700452208722,"sku":"","price":69.97,"currency_code":"USD","in_stock":false},{"title":"Bundle (Save 10%)","offer_id":40700452241490,"sku":"","price":89.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/02F1093D-3DE1-4E1B-9D83-AADD7F8E18FB.jpg?v=1706358239"},{"product_id":"mysterious-mercenary-pad-printed-figure-pre-order","title":"Mysterious Mercenary - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eMysterious Mercenary\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e– 360 degree pad printing \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Custom injection\u003c\/span\u003e\u003cspan\u003e-molded \u003c\/span\u003e\u003cspan\u003e(in steel molds\u003c\/span\u003e\u003cspan\u003e) helmet\u003c\/span\u003e\u003cspan\u003e, rangefinder and jetpack\u003c\/span\u003e\u003cspan\u003e, all of which feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. The helmet and jetpack are both printed and painted \u003cbr\u003e– Molded blaster and two molded vambraces in high\u003c\/span\u003e\u003cspan\u003e-quality plastic\u003c\/span\u003e\u003cspan\u003e, that all feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. \u003cbr\u003e– Custom cloth cape with a printed design \u003cbr\u003e– Custom molded hands\u003c\/span\u003e\u003cspan\u003e, with detailed decorations\u003c\/span\u003e\u003cspan\u003e, both printed and painted \u003cbr\u003e– Premium packaging \u003cbr\u003e– Two extra official LBG hands \u003cbr\u003e– One blank extra LBG official head\u003c\/span\u003e\u003cspan\u003e It will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, head\u003c\/span\u003e\u003cspan\u003e- and leg parts\u003c\/span\u003e\u003cspan\u003e. It also includes a metallic collector card\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around November \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e4\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: While the renders show two figures next to each other\u003c\/span\u003e\u003cspan\u003e, please bear in mind that the final product only contains one figure\u003c\/span\u003e\u003cspan\u003e. The renders only have two figures to show the front\u003c\/span\u003e\u003cspan\u003e- and back side at the same time\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e, the final product may look different\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures supplies components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" rel=\"noopener\" data-mce-href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":41010482839634,"sku":"FIG-400","price":136.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/BobaClean06.jpg?v=1716631479"},{"product_id":"package-saver-for-pre-orders","title":"Package Saver (for Pre-Order)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWhat is it?\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e: Package Saver is designed to take the place of similar package protection services, offering the ability to ensure you get your items for the low cost of $0.97!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb\u003eHow it works:\u003c\/b\u003e Add the ‘Package Saver’ item to your cart to be eligible for replacements on lost-in-transit packages or damaged items for each order! Should your package meet one of the pre-requisites, fill out our customer service form to receive a response about replacements or a refund within 24 business hours! It’s that easy!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat it covers:\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e Package Saver is designed to cover items that may be stolen from your porch\/mailbox, lost-in-transit, or items damaged in the mail! Please see below for more details.*\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLost-in-Transit:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThese are categorized as packages void of movement 60-days after their last service update. With mail services still operating slower due to the COVID-19 pandemic, this time frame may be extended at our discretion. Packages not protected with Package Saver that are lost in the mail, will no longer be eligible for free replacements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamaged Items:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThese are categorized as items specifically damaged in the transit process. These may include decals that become wet during transit, or packages crushed in shipping. Please consult a customer service representative to find out what else may qualify. Claims for damaged items must be filed within 3 days of the package being marked as ‘Delivered’.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003e\u003cem style=\"font-size: 0.875rem;\"\u003e*AVFIGURES reserves the right to use discretion when issuing replacements or refunds with the Package Saver service. Restrictions may apply.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\" data-mce-fragment=\"1\" data-mce-style=\"padding-left: 30px;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\" data-mce-fragment=\"1\" data-mce-style=\"padding-left: 30px;\"\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cb\u003eWhat does it NOT cover?:\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e \u003c\/span\u003ePackage Saver will\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cu\u003enot\u003c\/u\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecover items broken, damaged, or mis-applied by the consumer. As the name entails, this is a package protection service, and the consumer is liable for the usage of products post-delivery. \u003c\/p\u003e\n\u003cp\u003ePackage Saver will also\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cu\u003enot\u003c\/u\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecover packages that are stolen or missing after being marked as \"Delivered\". In the event that your order is marked as \"Delivered\" but is not there, you will have to contact your local Postal Service for assistance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41015999365202,"sku":null,"price":0.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/AVF_PackageSaver_9fd0a7ca-a427-40e9-b910-44495fb7e387.png?v=1716851109"},{"product_id":"volatile-viceroy-pad-printed-figure-pre-order","title":"Volatile Viceroy - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eVolatile Viceroy\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs and BoKatanBricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features detailed pad printing\u003c\/span\u003e\u003cspan\u003e, as well as a custom molded hat\u003c\/span\u003e\u003cspan\u003e, which is decorated in multiple colors\u003c\/span\u003e\u003cspan\u003e. The figure will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, head and skirt parts\u003c\/span\u003e\u003cspan\u003e. It also includes a custom cape and a collector card\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLIMIT ONE PER CUSTOMER until August 10th. \u003c\/strong\u003eWe want to ensure customers have a fair chance at purchasing a copy. Duplicate orders placed on August 9th will be refunded. If there is still inventory available by August 10th, we will remove the limitation, and allow for multiple quantities to be purchased\/have orders combined.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping month is around December \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e4\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: While the renders show two figures next to each other, please bear in mind that the final product only contains one figure. The renders only have two figures to show the front- and back side at the same time. These are digitally rendered previews; the final product may look different. The official parts might have hairline scratches from handling.\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca rel=\"noopener\" href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFinal note: Please add only this item and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":41138590122066,"sku":"FIG-421","price":72.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/nutey.jpg?v=1723196555"},{"product_id":"volatile-viceroy-pad-printed-figure-pre-order-reorder","title":"Volatile Viceroy - Pad Printed Figure Pre-Order REORDER","description":"\u003cp\u003e\u003cspan\u003eVolatile Viceroy\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs and BoKatanBricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese quantities stem from units unclaimed by BoKatanBricks customers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features detailed pad printing\u003c\/span\u003e\u003cspan\u003e, as well as a custom molded hat\u003c\/span\u003e\u003cspan\u003e, which is decorated in multiple colors\u003c\/span\u003e\u003cspan\u003e. The figure will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, head and skirt parts\u003c\/span\u003e\u003cspan\u003e. It also includes a custom cape and a collector card\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLIMIT ONE PER CUSTOMER. \u003c\/strong\u003eWe want to ensure customers have a fair chance at purchasing a copy.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping month is around December \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e4\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: While the renders show two figures next to each other, please bear in mind that the final product only contains one figure. The renders only have two figures to show the front- and back side at the same time. These are digitally rendered previews; the final product may look different. The official parts might have hairline scratches from handling.\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFinal note: Please add only this item and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":41190949584978,"sku":"FIG-421","price":72.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/nutey.jpg?v=1723196555"},{"product_id":"classic-actor-head","title":"Classic Actor Head Bonus Item","description":"\u003cp\u003e\u003cspan\u003eClassic Actor Head \u003c\/span\u003e\u003cspan\u003e(for Mercenary figure\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bonus item includes one head\u003c\/span\u003e\u003cspan\u003e, featuring detailed pad printing on four sides\u003c\/span\u003e\u003cspan\u003e. It will be printed on official parts\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: Please bear in mind that this bonus item only includes the head\u003c\/span\u003e\u003cspan\u003e, and nothing else that might have been shown in promotional materials alongside the head\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e; the final product may look different\u003c\/span\u003e\u003cspan\u003e. The official parts might have hairline scratches from handling\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is not being produced by AV Figures\u003c\/span\u003e\u003cspan\u003e, but by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. AV Figures coordinates shipping\u003c\/span\u003e\u003cspan\u003e, but does not directly handle production of the parts\u003c\/span\u003e\u003cspan\u003e. Please direct any inquiries you might have about the figure or its production to Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. The best way to contact Cobalt Customs is through Instagram DMs\u003c\/span\u003e\u003cspan\u003e; you can find him \u003c\/span\u003e\u003cspan\u003e@cobaltcustombricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41228698091602,"sku":"CC-001","price":7.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/BobaFett_Bulloch_background.jpg?v=1728740604"},{"product_id":"cloud-city-collection-printed-tile","title":"Cloud City Collection Printed Tile Bonus Item","description":"\u003cp\u003e\u003cspan\u003eCloud City collection printed tile\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 2x6 tile will be pad printed on official parts and is available to everyone who ordered two or more figures from the CC collection\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: Please bear in mind that this bonus item only includes the tile\u003c\/span\u003e\u003cspan\u003e, and nothing else that might have been shown in promotional materials alongside the tile\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e; the final product may look different\u003c\/span\u003e\u003cspan\u003e. The official parts might have hairline scratches from handling\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is not being produced by AV Figures\u003c\/span\u003e\u003cspan\u003e, but by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. AV Figures coordinates shipping\u003c\/span\u003e\u003cspan\u003e, but does not directly handle production of the parts\u003c\/span\u003e\u003cspan\u003e. Please direct any inquiries you might have about the figure or its production to Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. The best way to contact Cobalt Customs is through Instagram DMs\u003c\/span\u003e\u003cspan\u003e; you can find him \u003c\/span\u003e\u003cspan\u003e@cobaltcustombricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41228698386514,"sku":"CC-002","price":1.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/CC_tile_1.jpg?v=1728740905"},{"product_id":"scoundrel-blaster-bonus-item","title":"Scoundrel Blaster Bonus Item","description":"\u003cp\u003e\u003cspan\u003eScoundrel blaster bonus item\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis custom blaster will be molded in high quality plastic\u003c\/span\u003e\u003cspan\u003e, and features a muzzle decorated in metallic silver\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: Please bear in mind that this bonus item only includes the blaster\u003c\/span\u003e\u003cspan\u003e, and nothing else that might have been shown in promotional materials alongside the blaster\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e; the final product may look different\u003c\/span\u003e\u003cspan\u003e. Parts might have hairline scratches from handling\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is not being produced by AV Figures\u003c\/span\u003e\u003cspan\u003e, but by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. AV Figures coordinates shipping\u003c\/span\u003e\u003cspan\u003e, but does not directly handle production of the parts\u003c\/span\u003e\u003cspan\u003e. Please direct any inquiries you might have about the figure or its production to Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. The best way to contact Cobalt Customs is through Instagram DMs\u003c\/span\u003e\u003cspan\u003e; you can find him \u003c\/span\u003e\u003cspan\u003e@cobaltcustombricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41228698419282,"sku":"CC-003","price":6.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/CC_bonus_3-4.jpg?v=1728741012"},{"product_id":"carbonite-piece-bonus-item","title":"Carbonite Piece Bonus Item","description":"\u003cp\u003e\u003cspan\u003eCarbonite piece bonus item\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis custom piece will be molded in high quality plastic\u003c\/span\u003e\u003cspan\u003e, and features detailed pad printing on three sides\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: Please bear in mind that this bonus item only includes the carbonite piece\u003c\/span\u003e\u003cspan\u003e, and nothing else that might have been shown in promotional materials alongside the part\u003c\/span\u003e\u003cspan\u003e. While the renders show two pieces next to each other\u003c\/span\u003e\u003cspan\u003e, the final product only contains one piece\u003c\/span\u003e\u003cspan\u003e. The renders only have two pieces to show the front\u003c\/span\u003e\u003cspan\u003e- and back side at the same time\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e; the final product may look different\u003c\/span\u003e\u003cspan\u003e. Parts might have hairline scratches from handling\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is not being produced by AV Figures\u003c\/span\u003e\u003cspan\u003e, but by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. AV Figures coordinates shipping\u003c\/span\u003e\u003cspan\u003e, but does not directly handle production of the parts\u003c\/span\u003e\u003cspan\u003e. Please direct any inquiries you might have about the figure or its production to Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. The best way to contact Cobalt Customs is through Instagram DMs\u003c\/span\u003e\u003cspan\u003e; you can find him \u003c\/span\u003e\u003cspan\u003e@cobaltcustombricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41228698517586,"sku":"CC-004","price":20.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/image0_018e0f3d-d7d7-4b59-956e-b074b4eaab3c.jpg?v=1728741102"},{"product_id":"jej-head-bonus-item","title":"JEJ Head Bonus Item","description":"\u003cp\u003e\u003cspan\u003eJEJ Head bonus item\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis bonus item includes one medium brown head\u003c\/span\u003e\u003cspan\u003e, featuring detailed pad printing as well as metallic prints\u003c\/span\u003e\u003cspan\u003e. It will be printed on official parts and also includes an official hair piece\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: Please bear in mind that this bonus item only includes the head piece\u003c\/span\u003e\u003cspan\u003e, and nothing else that might have been shown in promotional materials alongside the head\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e; the final product may look different\u003c\/span\u003e\u003cspan\u003e. Parts might have hairline scratches from handling\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is not being produced by AV Figures\u003c\/span\u003e\u003cspan\u003e, but by Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. AV Figures coordinates shipping\u003c\/span\u003e\u003cspan\u003e, but does not directly handle production of the parts\u003c\/span\u003e\u003cspan\u003e. Please direct any inquiries you might have about the figure or its production to Cobalt Customs\u003c\/span\u003e\u003cspan\u003e. The best way to contact Cobalt Customs is through Instagram DMs\u003c\/span\u003e\u003cspan\u003e; you can find him \u003c\/span\u003e\u003cspan\u003e@cobaltcustombricks\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41228700057682,"sku":"CC-005","price":7.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/JEJ_Face_newest_2.jpg?v=1728741214"},{"product_id":"prototype-pursuer-pad-printed-figure-pre-order","title":"Prototype Pursuer - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003ePrototype Pursuer, by Cobalt Customs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ehe figure features\u003c\/span\u003e\u003cspan\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e– 360 degree pad printing \u2028\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Custom injection\u003c\/span\u003e\u003cspan\u003e-molded \u003c\/span\u003e\u003cspan\u003e(in steel molds\u003c\/span\u003e\u003cspan\u003e) helmet\u003c\/span\u003e\u003cspan\u003e, rangefinder and jetpack\u003c\/span\u003e\u003cspan\u003e, all of which feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. The helmet and jetpack are both printed and painted \u2028\u003cbr\u003e– Molded blaster and two molded vambraces in high\u003c\/span\u003e\u003cspan\u003e-quality plastic\u003c\/span\u003e\u003cspan\u003e, that all feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. \u2028\u003cbr\u003e– Custom cloth cape with a printed design \u2028\u003cbr\u003e– Custom molded hands\u003c\/span\u003e\u003cspan\u003e, with detailed decorations\u003c\/span\u003e\u003cspan\u003e, both printed and painted \u2028\u003cbr\u003e– Premium packaging \u2028\u003cbr\u003e– It will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, head\u003c\/span\u003e\u003cspan\u003e- and leg parts\u003c\/span\u003e\u003cspan\u003e. It also includes a metallic collector card\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 2025\u003c\/span\u003e\u003cspan\u003e Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e, the final product may look different\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures supplies components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" rel=\"noopener\" data-mce-href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":41228703465554,"sku":"CC-006","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/BDBFBE95-9E79-41BF-9823-A2517285A0C9.png?v=1728741575"},{"product_id":"vintage-vigilante-pad-printed-figure-pre-order","title":"Vintage Vigilante - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eVintage Vigilante, by Cobalt Customs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e– 360 degree pad printing \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Custom injection\u003c\/span\u003e\u003cspan\u003e-molded \u003c\/span\u003e\u003cspan\u003e(in steel molds\u003c\/span\u003e\u003cspan\u003e) helmet\u003c\/span\u003e\u003cspan\u003e, rangefinder and jetpack\u003c\/span\u003e\u003cspan\u003e, all of which feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. The helmet and jetpack are both printed and painted \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Molded blaster and two molded vambraces in high\u003c\/span\u003e\u003cspan\u003e-quality plastic\u003c\/span\u003e\u003cspan\u003e, that all feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. \u2028– Custom cloth cape with a printed design \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Custom molded hands\u003c\/span\u003e\u003cspan\u003e, with detailed decorations\u003c\/span\u003e\u003cspan\u003e, both printed and painted \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Premium packaging \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– It will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, head\u003c\/span\u003e\u003cspan\u003e- and leg parts\u003c\/span\u003e\u003cspan\u003e. It also includes a metallic collector card\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is around Q1 2025\u003c\/span\u003e\u003cspan\u003e Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e, the final product may look different\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures supplies components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca rel=\"noopener\" href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\" data-mce-href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":41228704022610,"sku":"CC-007","price":137.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/15EBB979-4AAA-4A42-B7A4-20481016EF42.png?v=1728741815"},{"product_id":"jinx-vi-pad-printed-figure-bundle-pre-order","title":"Jinx \u0026 Vi - Pad Printed Figure Bundle PRE-ORDER","description":"\u003ch2\u003e\u003cspan\u003eWelcome to The Playground\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet of two\u003c\/strong\u003e (1 Jinx \u0026amp; 1 Vi), no individuals: \u003cstrong\u003e$135\u003c\/strong\u003e - \u003cstrong\u003epre-order\u003c\/strong\u003e expected to finish production within 2025. Regular updates will be issued via \u003ca href=\"https:\/\/www.instagram.com\/avfigures\/?hl=en\"\u003eInstagram\u003c\/a\u003e and \u003ca href=\"discord.gg\/av8rcommunity\"\u003eDiscord\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eDetails\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCMF-style design with metallics, fully pad printed on all official parts (Jinx torso recolored due to scarcity of official blanks)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual sided head for both, neutral \u0026amp; beat-up expression\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFaux overmold arms and legs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom molded and decorated hairpieces for both\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom molded and decorated pistol for Jinx\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom printed official gauntlets for Vi\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe printing and molding is outsourced to a trusted, vetted manufacturer with extensive experience in pad printing minifigures. AVFIGURES will be handling the distribution for these figures, and will issue updates alongside JakobKaiserMOCs to keep everyone informed of the projects' status.\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41352861974610,"sku":"FIG-482","price":135.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Arcane_Composite_Teaser_Edit2.png?v=1738401795"},{"product_id":"techno-titan-pad-printed-figure-pre-order","title":"Techno Titan - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eTechno Titan\u003c\/span\u003e\u003cspan\u003e, by Cobalt Customs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features\u003c\/span\u003e\u003cspan\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e– 360 degree pad printing \u2028\u003cbr\u003e– Custom molded and decorated head\u003c\/span\u003e\u003cspan\u003e, chest piece and skirt\u2028\u003cbr\u003e– Custom molded hands\u003c\/span\u003e\u003cspan\u003e, with detailed decorations\u003cbr\u003e– It will be printed on official torso and arm parts and includes a metallic collector card\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e The estimated shipping time is in late \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: While some renders might show two figures next to each other\u003c\/span\u003e\u003cspan\u003e, please bear in mind that the final product only contains one figure\u003c\/span\u003e\u003cspan\u003e. The renders only have two figures to show the front\u003c\/span\u003e\u003cspan\u003e- and back side at the same time\u003c\/span\u003e\u003cspan\u003e. These are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e, the final product may look different\u003c\/span\u003e\u003cspan\u003e. The official pieces might have hairline scratches from handling\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note\u003c\/span\u003e\u003cspan\u003e: Please add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAs this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":41956731486290,"sku":"FIG-483","price":85.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/WatFinalish28.png?v=1739036868"},{"product_id":"darth-revan-pad-printed-figure-pre-order","title":"Darth Revan - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003eis excited to announce our next pad printed figure pre\u003c\/span\u003e\u003cspan\u003e-order\u003c\/span\u003e\u003cspan\u003e: Darth Revan\u003c\/span\u003e\u003cspan\u003e! This figure was made in collaboration with \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.instagram.com\/bradysbricks\/\" target=\"_blank\"\u003e\u003cspan role=\"button\" aria-expanded=\"false\" class=\"mention wrapper_f61d60 interactive\" tabindex=\"0\"\u003eBradysBricks\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.instagram.com\/danger_greg\/\" target=\"_blank\"\u003e\u003cspan role=\"button\" aria-expanded=\"false\" class=\"mention wrapper_f61d60 interactive\" tabindex=\"0\"\u003eDangerGreg\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, and will be produced and distributed by \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eAVFIGURES\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e. Pre\u003c\/span\u003e\u003cspan\u003e-Orders open at \u003c\/span\u003e\u003cspan\u003e1\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e:00 PM PST\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e360 degree pad printed torso, arms, and dress piece\u003c\/span\u003e\u003cspan\u003e (designed by BradysBricks\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2x Custom Molded\u003c\/span\u003e\u003cspan\u003e, ink\u003c\/span\u003e\u003cspan\u003e-painted Lightsabers \u003c\/span\u003e\u003cspan\u003e(designed by DangerGreg\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eOfficial hairpiece\u003c\/span\u003e\u003cspan\u003e, ink\u003c\/span\u003e\u003cspan\u003e-painted black\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCustom Molded hood \u003c\/span\u003e\u003cspan\u003e+ mask combination \u003c\/span\u003e\u003cspan\u003e(designed by \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eAVFIGURES\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCustom Molded Cape \u003c\/span\u003e\u003cspan\u003e(designed by \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eAVFIGURES\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCustom Molded, pad printed hands\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Blank black head\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Double\u003c\/span\u003e\u003cspan\u003e-sided face print \u003c\/span\u003e\u003cspan\u003e(designed by DangerGreg\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Official red lightsaber blade\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan\u003e1x Official purple lightsaber blade\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will be pad printed on official torso, arms, head, and dress parts\u003c\/span\u003e\u003cspan\u003e. It will also come in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: While the renders show two figures next to each other, please bear in mind that the final product only contains one figure. The renders only have two figures to show the front and back side at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q2 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at AVFIGURES\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAs this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41956731519058,"sku":"FIG-484","price":97.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Revan_Main_Photo.jpg?v=1739038966"},{"product_id":"redeemed-revan-pad-printed-figure-pre-order","title":"Redeemed Revan - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003eis excited to announce our next pad printed figure pre\u003c\/span\u003e\u003cspan\u003e-order\u003c\/span\u003e\u003cspan\u003e: Redeemed Revan\u003c\/span\u003e\u003cspan\u003e! This figure was made in collaboration with \u003c\/span\u003e\u003ca href=\"https:\/\/www.instagram.com\/bradysbricks\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan class=\"mention wrapper_f61d60 interactive\" aria-expanded=\"false\" role=\"button\" tabindex=\"0\"\u003eBradysBricks\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.instagram.com\/danger_greg\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan class=\"mention wrapper_f61d60 interactive\" aria-expanded=\"false\" role=\"button\" tabindex=\"0\"\u003eDangerGreg\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, and will be produced and distributed by \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eAVFIGURES\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e. This is produced as a variant of our Darth Revan minifigure, and will be manufactured at the same time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have previously pre-ordered our Darth Revan minifigure, use discount code \u003cstrong\u003eREVANVARIANT \u003c\/strong\u003eat checkout for 20% off this variant!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e360 degree pad printed torso, arms, and dress piece\u003c\/span\u003e\u003cspan\u003e (designed by BradysBricks\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Molded\u003c\/span\u003e\u003cspan\u003e, ink\u003c\/span\u003e\u003cspan\u003e-painted Lightsabers \u003c\/span\u003e\u003cspan\u003e(designed by DangerGreg\u003c\/span\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCustom Molded hood \u003c\/span\u003e\u003cspan\u003e+ mask combination \u003c\/span\u003e\u003cspan\u003e(designed by \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eAVFIGURES\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCustom Molded Cape \u003c\/span\u003e\u003cspan\u003e(designed by \u003c\/span\u003e\u003cem\u003e\u003cspan\u003eAVFIGURES\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCustom Molded, pad printed hands\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan\u003e1x Blank black head\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan\u003e1x Official purple lightsaber blade\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will be pad printed on official torso, arms, head, and dress parts\u003c\/span\u003e\u003cspan\u003e. It will also come in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: While the renders show two figures next to each other, please bear in mind that the final product only contains one figure. The renders only have two figures to show the front and back side at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q2 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at AVFIGURES\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAs this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":41999927017554,"sku":"FIG-502","price":94.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/RedeemedRevan.jpg?v=1742632638"},{"product_id":"cloned-contractor-pad-printed-figure-pre-order","title":"Cloned Contractor - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eCloned Contractor, by Cobalt Customs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features\u003c\/span\u003e\u003cspan\u003e: \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– 360 degree pad printing \u2028\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e– Custom injection\u003c\/span\u003e\u003cspan\u003e-molded \u003c\/span\u003e\u003cspan\u003e(in steel molds\u003c\/span\u003e\u003cspan\u003e) ABS helmet\u003c\/span\u003e\u003cspan\u003e, rangefinder and jetpack\u003c\/span\u003e\u003cspan\u003e, all of which feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. The helmet and jetpack are both printed and painted\u003c\/span\u003e\u003cspan\u003e.\u2028\u003cbr\u003e– Two molded blasters in ABS\u003c\/span\u003e\u003cspan\u003e. \u003cbr\u003e– Two vambraces which feature detailed decorations\u003c\/span\u003e\u003cspan\u003e. \u003cbr\u003e– Legs and arms that are airbrushed using pad printing ink in a custom color\u003c\/span\u003e\u003cspan\u003e. \u003cbr\u003e– Four heads in DBG\u003c\/span\u003e\u003cspan\u003e, two of which feature airbrushed necks in a custom color – Black official hands\u003c\/span\u003e\u003cspan\u003e, as well as an official torso in PDG\u003c\/span\u003e\u003cspan\u003e.\u2028 The figure will be printed on official torso\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, arm\u003c\/span\u003e\u003cspan\u003e-\u003c\/span\u003e\u003cspan\u003e, head\u003c\/span\u003e\u003cspan\u003e- and leg parts\u003c\/span\u003e\u003cspan\u003e. It also includes a metallic collector card\u003c\/span\u003e\u003cspan\u003e.\u003cbr\u003e- Official Hairpiece\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe estimated shipping time is in late \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\u003cspan\u003e. Please be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The production is outsourced to trusted manufacturers\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT\u003c\/span\u003e\u003cspan\u003e: \u003c\/span\u003e\u003cspan\u003eThese are digitally rendered previews\u003c\/span\u003e\u003cspan\u003e, the final product may look different\u003c\/span\u003e\u003cspan\u003e. Some parts are airbrushed in custom colors using pad printing ink.\u003c\/span\u003e\u003cspan\u003e Due to the tightness of some minifigure parts, the durability of the paint may be compromised if handled improperly\u003c\/span\u003e\u003cspan\u003e. Please handle the figures with care\u003c\/span\u003e\u003cspan\u003e, and do not subject the airbrushed parts to excessive wear\u003c\/span\u003e\u003cspan\u003e, as that runs the risk of damaging them\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures supplies components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca rel=\"noopener\" href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note\u003c\/span\u003e\u003cspan\u003e: Please add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) \u003cstrong\u003ePackage Saver\u003c\/strong\u003e to your order\u003c\/span\u003e\u003cspan\u003e. Any other items that are in your cart at checkout will have to split into separate orders\u003c\/span\u003e\u003cspan\u003e, and shipping will be charged separately\u003c\/span\u003e\u003cspan\u003e. As this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42014430953554,"sku":"FIG-505","price":127.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/DC136985-6223-411B-86B6-C245C3FA8FE3.png?v=1743704856"},{"product_id":"the-grand-inquisitor-pad-printed-figure-pre-order","title":"The Grand Inquisitor - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003eis excited to announce our next pad printed figure pre\u003c\/span\u003e\u003cspan\u003e-order\u003c\/span\u003e\u003cspan\u003e: The Grand Inquisitor\u003c\/span\u003e\u003cspan\u003e! This figure was made in collaboration with\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.instagram.com\/danger_greg\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan class=\"mention wrapper_f61d60 interactive\" aria-expanded=\"false\" role=\"button\" tabindex=\"0\"\u003eDangerGreg\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, and will be produced and distributed by \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003ePad printed torso, arms, and legs\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Steel-Molded\u003c\/span\u003e\u003cspan\u003e, ink\u003c\/span\u003e\u003cspan\u003e-painted Lightsaber with rotating functionality\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Steel-Molded, ink-painted Lightsaber (folded)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2x Custom Steel-Molded Animated-style, magnetic shoulder pads\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Steel-Molded, pad printed helmet\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Steel-Molded, ink-painted collar\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1x 360-degree pad printed head\u003c\/li\u003e\n\u003cli\u003e1x 360-degree pad printed alternate head (angry expression)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2x Official red lightsaber blades\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will be pad printed on official torso, arms, and head parts\u003c\/span\u003e\u003cspan\u003e. It will also come in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAs this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA portion of the profits is attributed to DangerGreg, the designer of this figure! Purchasing this product enables Greg to continue making new and exciting products!\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42038758670418,"sku":"FIG-509","price":84.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/GIhelmetandsabershotshot.png?v=1746328340"},{"product_id":"cad-bane-pad-printed-figure-pre-order","title":"Cad Bane - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: Cad Bane! This figure was made in collaboration with \u003ca href=\"https:\/\/www.instagram.com\/nanorex_designs\/\"\u003eNanoRex\u003c\/a\u003e, and will be produced and distributed by \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e. NanoRex designed this figure and all 3D components.\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003ePad printed torso, arms, head, and legs\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan\u003e1x Custom cloth waistcape\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2x Custom Steel-Molded replica hands with ink-painted fingertips\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2x Custom Steel-Molded\u003c\/span\u003e\u003cspan\u003e, ink\u003c\/span\u003e\u003cspan\u003e-painted blasters\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Steel-Molded, ink-painted hat\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Steel-Molded Satchel (permanently affixed to the cloth waistcape)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e1x Custom Molded, ink-painted breather tubes\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will be pad printed on official torso, arms, and head parts\u003c\/span\u003e\u003cspan\u003e. It will also come in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAs this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA portion of the profits is attributed to NanoRex, the designer of this figure! Purchasing this product enables NanoRex to continue making new and exciting products!\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42038762635346,"sku":"FIG-510","price":79.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/IMG-8852.png?v=1746342403"},{"product_id":"k-2so-pad-printed-figure-pre-order","title":"K-2SO - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: K-2SO\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eABS, Steel-Molded custom body parts\u003c\/li\u003e\n\u003cli\u003ePosable elbows, posable shoulders, posable torso (the upper torso can rotate left and right) independently posable legs (knees do not bend), and posable head\u003c\/li\u003e\n\u003cli\u003ePad Printed patterns and weathering\u003c\/li\u003e\n\u003cli\u003eInk-painted, metallic gunmetal joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: The image comparing the size to a minifigure is outdated, and shows bright silver joints. Please refer to the other images, with darker joints and detailed eyes, to get a more accurate representation of the final design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003eAs this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure (1x)","offer_id":42256709517394,"sku":"FIG-511","price":59.97,"currency_code":"USD","in_stock":false},{"title":"Squad Pack (4x)","offer_id":42256709550162,"sku":"FIG-511 x4","price":215.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/K-2SOIMAGEUPDATE.jpg?v=1750447613"},{"product_id":"intrepid-infiltrator-pad-printed-figure-pre-order","title":"Intrepid Infiltrator - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eIntrepid Infiltrator, by Cobalt Customs \u0026amp; AV Figures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e360 degree pad printing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom molded helmet in high-quality plastic, designed by AV Figures, which features pad-printed and decorated elements, along with separate molded breathing tubes made of rubber or high-quality plastic.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCustom molded blaster, in high-quality plastic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAn official hairpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOfficial hands featuring pad printing.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe figure will be printed on official torso-, hips-, arm-, head- and leg parts. It also includes a metallic collector card. The estimated shipping time is in late 2025. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e IMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject the parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by \u003cstrong\u003eCobalt Customs\u003c\/strong\u003e. AV Figures supplies components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him \u003ca rel=\"noopener\" href=\"https:\/\/www.instagram.com\/cobaltcustombricks\/\" target=\"_blank\"\u003e@cobaltcustombricks.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther note: There will also be decal versions and a 3D-printed helmet of this fig available separately at a later date.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note\u003c\/span\u003e\u003cspan\u003e: Please add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) \u003cstrong\u003ePackage Saver\u003c\/strong\u003e to your order\u003c\/span\u003e\u003cspan\u003e. Any other items that are in your cart at checkout will have to split into separate orders\u003c\/span\u003e\u003cspan\u003e, and shipping will be charged separately\u003c\/span\u003e\u003cspan\u003e. As this product\u003c\/span\u003e\u003cspan\u003e's shipping timeline is different from all other products on the store\u003c\/span\u003e\u003cspan\u003e, we cannot combine its shipment with other products\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42073333825618,"sku":"FIG-534","price":76.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/7DE8D62C-ED76-4D87-82A1-2419FF74FCFB.png?v=1750474570"},{"product_id":"kx-droid-grunt-pad-printed-figure-pre-order","title":"KX Droid Grunt Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: KX Droid Grunts.\u003c\/p\u003e\n\u003cp\u003eif you have previously pre-ordered our K-2SO minifigure, use discount code \u003cstrong\u003eKXGRUNT \u003c\/strong\u003eat checkout for 20% off this variant!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eABS, Steel-Molded custom body parts\u003c\/li\u003e\n\u003cli\u003ePosable elbows, posable shoulders (ball jointed), independently posable legs (knees do not bend), posable hips (can rotate left and right), and posable head (ball jointed)\u003c\/li\u003e\n\u003cli\u003ePad Printed patterns\u003c\/li\u003e\n\u003cli\u003eInk-painted, metallic gunmetal joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e This pre-order can be combined with K-2SO pre-orders, but cannot be combined with other orders due to differing production timelines.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure (x1)","offer_id":42256710172754,"sku":"FIG-535","price":39.97,"currency_code":"USD","in_stock":false},{"title":"Squad Pack (x4)","offer_id":42256710205522,"sku":"FIG-535 x4","price":143.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/K-2SOClean.jpg?v=1751100386"},{"product_id":"kx-enforcer-droid-pad-printed-figure-pre-order","title":"KX Enforcer Droid Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: KX Enforcer Droid.\u003c\/p\u003e\n\u003cp\u003eif you have previously pre-ordered our K-2SO minifigure, use discount code \u003cstrong\u003eKXGRUNT \u003c\/strong\u003eat checkout for 20% off this variant!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eABS, Steel-Molded custom plastic injected body parts, backpack, and baton\u003c\/li\u003e\n\u003cli\u003ePosable elbows, posable shoulders (ball jointed), independently posable legs (knees do not bend), posable hips (can rotate left and right), and posable head (ball jointed)\u003c\/li\u003e\n\u003cli\u003ePad Printed patterns\u003c\/li\u003e\n\u003cli\u003eInk-painted, metallic gunmetal joints\u003c\/li\u003e\n\u003cli\u003e24 AWG Wire detailing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e This pre-order can be combined with K-2SO pre-orders, but cannot be combined with other orders due to differing production timelines.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure (x1)","offer_id":42256711352402,"sku":"FIG-551","price":49.97,"currency_code":"USD","in_stock":false},{"title":"Squad Pack (x4)","offer_id":42256711385170,"sku":"FIG-551 x4","price":179.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/KXEnforcerDroidMain.jpg?v=1754125683"},{"product_id":"k-405-pad-printed-figure-pre-order","title":"K-405 Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: K-405, as seen in the hit videogame Jedi: Survivor!\u003c\/p\u003e\n\u003cp\u003eif you have previously pre-ordered our K-2SO minifigure, use discount code \u003cstrong\u003eKXGRUNT \u003c\/strong\u003eat checkout for 20% off this variant!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eABS, Steel-Molded custom plastic injected body parts, backpack, and baton\u003c\/li\u003e\n\u003cli\u003ePosable elbows, posable shoulders (ball jointed), independently posable legs (knees do not bend), posable hips (can rotate left and right), and posable head (ball jointed)\u003c\/li\u003e\n\u003cli\u003ePad Printed patterns\u003c\/li\u003e\n\u003cli\u003eInk-painted, metallic gunmetal joints\u003c\/li\u003e\n\u003cli\u003e24 AWG Wire detailing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e This pre-order can be combined with K-2SO pre-orders, but cannot be combined with other orders due to differing production timelines.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure (x1)","offer_id":42256711450706,"sku":"FIG-550","price":69.97,"currency_code":"USD","in_stock":false},{"title":"Squad Pack (x4)","offer_id":42256711483474,"sku":"FIG-550 x4","price":251.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/K-405Main.jpg?v=1754126016"},{"product_id":"federation-flyer-pad-printed-figure-pre-order","title":"Federation Flyer - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eFederation Flyer, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. It will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42120104214610,"sku":null,"price":63.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Cobalt_Customs_Tey_How_Pad_Printed_Minifigure_Custom_LEGO.png?v=1755341175"},{"product_id":"federation-flyer-pad-printed-figure-pre-order-early-access","title":"Federation Flyer - Pad Printed Figure Pre-Order EARLY ACCESS","description":"\u003cp\u003e\u003cspan\u003eFederation Flyer, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. It will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42120105951314,"sku":null,"price":63.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Cobalt_Customs_Tey_How_Pad_Printed_Minifigure_Custom_LEGO.png?v=1755341175"},{"product_id":"stunted-slime-pad-printed-figure-pre-order-early-access","title":"Stunted Slime - Pad Printed Figure Pre-Order EARLY ACCESS","description":"\u003cp\u003eStunted Slime, by Cobalt Customs.\u003c\/p\u003e\n\u003cp\u003eThe figure features 360° pad printing, a custom molded hat in high-quality plastic, and a custom cape. It will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The \u003cstrong\u003eestimated shipping time\u003c\/strong\u003e is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by\u003cbr\u003eAV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/p\u003e\n\u003cp\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42120106082386,"sku":null,"price":57.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Daultay_1.png?v=1755445196"},{"product_id":"stunted-slime-pad-printed-figure-pre-order","title":"Stunted Slime - Pad Printed Figure Pre-Order","description":"\u003cp\u003eStunted Slime, by Cobalt Customs.\u003c\/p\u003e\n\u003cp\u003eThe figure features 360° pad printing, a custom molded hat in high-quality plastic, and a custom cape. It will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The \u003cstrong\u003eestimated shipping time\u003c\/strong\u003e is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by\u003cbr\u003eAV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/p\u003e\n\u003cp\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42120106115154,"sku":null,"price":57.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Daultay_1_6bfe5af7-1a01-4e66-87bb-73d68aa54801.png?v=1755445224"},{"product_id":"federation-flyer-stunted-slime-bundle-pad-printed-figure-pre-order-early-access","title":"Federation Flyer \u0026 Stunted Slime Bundle - Pad Printed Figure Pre-Order EARLY ACCESS","description":"\u003cp\u003e\u003cspan\u003eFederation Flyer, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. It will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The \u003cstrong\u003eestimated shipping time\u003c\/strong\u003e is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42120106147922,"sku":null,"price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/639965F1-18C4-4B28-9386-9B3EBEC6615F.png?v=1755445230"},{"product_id":"federation-flyer-stunted-slime-bundle-pad-printed-figure-pre-order","title":"Federation Flyer \u0026 Stunted Slime Bundle - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eFederation Flyer, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. It will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The \u003cstrong\u003eestimated shipping time\u003c\/strong\u003e is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42120106278994,"sku":null,"price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/639965F1-18C4-4B28-9386-9B3EBEC6615F_06d308ca-e178-40c1-97b1-fb5624f0ea37.png?v=1755445235"},{"product_id":"federation-functionary-pad-printed-figure-pre-order","title":"Federation Functionary - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cspan\u003eFederation Functionary, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. The hat also features metallic silver decorations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42168369021010,"sku":null,"price":49.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/A69259AA-E832-40C6-AB8F-8B896587DAC4.png?v=1759574489"},{"product_id":"federation-functionary-pad-printed-figure-exclusive-pre-order","title":"Federation Functionary - Pad Printed Figure EXCLUSIVE Pre-Order","description":"\u003cp\u003e\u003cspan\u003eFederation Functionary, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. The hat also features metallic silver decorations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42168372822098,"sku":null,"price":39.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/A69259AA-E832-40C6-AB8F-8B896587DAC4.png?v=1759574489"},{"product_id":"federation-functionary-variant-pad-printed-figure-exclusive-pre-order","title":"Federation Functionary VARIANT - Pad Printed Figure EXCLUSIVE Pre-Order","description":"\u003cp\u003e\u003cspan\u003eFederation Functionary Variant, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe figure features 360° pad printing and a custom molded hat in high-quality plastic. The hat also features metallic silver decorations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt will be printed on official torso-, arm-, head- and skirt parts. It also includes a metallic collector card. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42168375672914,"sku":null,"price":39.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/8F08C463-70DB-494C-97B2-086772BFEFA1.png?v=1759574916"},{"product_id":"federation-functionary-hat-exclusive-pre-order","title":"Federation Functionary Hat EXCLUSIVE Pre-Order","description":"\u003cp\u003e\u003cspan\u003eFederation Functionary Hat, by Cobalt Customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFederation Functionary hat, by Cobalt Customs. To note is that this listing is only for the Functionary hat and does not contain the figure itself. Please see our other listings for the full figures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe custom molded hat is molded in high-quality plastic. The hat also features metallic silver decorations. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobalt Customs","offers":[{"title":"Default Title","offer_id":42168377180242,"sku":null,"price":14.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/EDC2C788-7619-41D2-A0A9-CE764F89EC04.png?v=1759575071"},{"product_id":"tactical-b-01a-helldiver-pad-printed-figure-back-order-1","title":"Tactical B-01A Helldiver - Pad Printed Figure BACK-ORDER","description":"\u003cp\u003eNow on back-order, the Tactical B-01A Helldiver makes a return to our production queue!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360 degree pad-printing\u003c\/li\u003e\n\u003cli\u003eInjection molded Helmet, Chestplate, Shoulder Pads, with pad printed coloring\u003c\/li\u003e\n\u003cli\u003eInjection Molded AR-23 Liberator Rifle, with ink-painted coloring\u003c\/li\u003e\n\u003cli\u003eCustom cloth Foesmasher Cape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis figure will be printed on official parts. It will also come in a collectible metal tin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe production is estimated to begin in January 2026, and complete ship sometime Q1-Q2 of 2026.\u003c\/strong\u003e Please be aware that this is an estimate, and the final shipping date may vary. \u003cspan\u003eThe printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42170874888274,"sku":"FIG-576","price":69.97,"currency_code":"USD","in_stock":true},{"title":"Squad Bundle (4x)","offer_id":42170874921042,"sku":"FIG-577","price":251.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/24-25_01a119b7-b8fa-4e7d-b50c-0a5494877e53.jpg?v=1759797207"},{"product_id":"lord-starkiller-pad-printed-figure-pre-order-1","title":"Lord Starkiller - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: Lord Starkiller, as he appears in an alternate ending of The Force Unleashed!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded custom plastic Helmet, Shoulder Pads, Lightsaber, and Clawed Hands\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printing\u003c\/li\u003e\n\u003cli\u003eInk-painted, injection-molded lightsaber\u003c\/li\u003e\n\u003cli\u003eLaser-cut Waistcape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q2 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42178865496146,"sku":"FIG-566","price":104.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/LordStarkiller1_4bee378c-1916-4e74-ab64-f5c015ba856f.jpg?v=1760391018"},{"product_id":"lord-starkiller-180-torso-version-pad-printed-figure-pre-order","title":"Lord Starkiller (180° Torso Version) - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: Lord Starkiller, as he appears in an alternate ending of The Force Unleashed!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded custom plastic Helmet, Shoulder Pads, Lightsaber, and Clawed Hands\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around leg pad printing\u003c\/li\u003e\n\u003cli\u003e180° Torso Printing\u003c\/li\u003e\n\u003cli\u003eInk-painted, injection-molded lightsaber\u003c\/li\u003e\n\u003cli\u003eLaser-cut Waistcape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q2 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIf you have already purchased the original, 360 Torso version and wish to switch it for this version, feel free to contact support@avfigures.com. We can refund the difference.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42178869264466,"sku":"FIG-567","price":94.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/StarkillerDouble180_11f291fe-9916-438a-888b-552a14964e0d.png?v=1760391987"},{"product_id":"covert-clinician-pad-printed-figure-pre-order","title":"Covert Clinician Pad Printed Figure Pre-Order","description":"\u003cp\u003eCovert Clinician, by Cobalt Customs.\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003cbr\u003e- 360° pad printing\u003cbr\u003e- A custom molded remote in high-quality plastic, with decorations and pad printing.\u003cbr\u003e- Custom molded collar, in high-quality plastic \u003cbr\u003e- Upper toe printing\u003cbr\u003e- Airbrushed neck collar\u003cbr\u003e- Two heads, with different expressions\u003cbr\u003e- An official hairpiece in dark brown\u003c\/p\u003e\n\u003cp\u003eIt will be printed on official torso-, arm-, head-, hip- and leg parts. It also includes a metallic collector card. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing.\u003c\/p\u003e\n\u003cp\u003eThis figure is not being produced by AV Figures, but by Cobalt Customs. AV Figures may supply components for the figures and coordinates shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figure or its production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/p\u003e\n\u003cp\u003eFinal note: Please add only this item or its bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42190369292370,"sku":null,"price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/IMG-0126.png?v=1761459416"},{"product_id":"f-star-wars-visions-pad-printed-figure-pre-order","title":"F - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: F, as she appears in Star Wars: Visions!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded custom plastic hairpiece, lowered hood, raised hood, cloak, and wrist cuffs\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed detailing\u003c\/li\u003e\n\u003cli\u003eCustom pad printed Replica Hands\u003c\/li\u003e\n\u003cli\u003e2x custom pad printed heads (one anime-style, one LEGO-style)\u003c\/li\u003e\n\u003cli\u003eInk-painted, injection-molded custom plastic lightsaber\u003c\/li\u003e\n\u003cli\u003eTrans-yellow, injection-molded custom lightsaber blade\u003c\/li\u003e\n\u003cli\u003eCustom red-and-black Fabric Cape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q3 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The injection mold is reliably produced by the same manufacturers that make our ABS items. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42196027899986,"sku":null,"price":79.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/FHeroImage_LEGOEyes.png?v=1761808551"},{"product_id":"digital-perfectionist-clu","title":"Digital Perfectionist (CLU)","description":"\u003cp\u003e\u003cspan\u003eDigital Perfectionist, by NanoRex Designs and Cobalt Customs. The Combat Outfit features: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003ePad-printed torso, arms, and legs\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePad-printed head with determined expression\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBlank black head\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded pad-printed helmet\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded hair\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded energized identity disc\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded non-energized identity disc\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e The Formal Outfit features: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003ePad printed torso and arms\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePad printed head with smug expression\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded hair\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded non-energized identity disc\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded pad-printed cape\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInjection-molded pad-printed robe leg element (NO articulation)\u003c\/span\u003e\u003cspan class=\"hiddenVisually_b18fe2\"\u003e,\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e For each figure pre-ordered, pre-orderers will receive a pair of printed hands as a pre-order bonus! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen both outfits are purchased as a bundle, an additional, identical helmet to that included with the Combat Outfit will also be included. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA metallic collector card is included. The estimated shipping time is in 2026. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. The figures do not self-illuminate nor do they \"glow in the dark\". These figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or manufacturing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese figures are not being produced by AVFIGURES, but by Cobalt Customs and NanoRex Designs. AVFIGURES may supply components for the figures and coordinate shipping, but does not directly handle production of decorated parts. Please direct any inquiries you might have about the figures or their production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinal note: Please add only these items or their bundle version and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Combat Outfit","offer_id":42201459064914,"sku":null,"price":81.0,"currency_code":"USD","in_stock":false},{"title":"Formal Outfit","offer_id":42201459097682,"sku":null,"price":69.0,"currency_code":"USD","in_stock":false},{"title":"Bundle","offer_id":42201459130450,"sku":null,"price":137.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/IMG-0363.png?v=1763066110"},{"product_id":"ven-zallow-pad-printed-figure-pre-order","title":"Ven Zallow - Pad Printed Figure Pre-Order","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: Ven Zallow, as he appears in Star Wars: The Old Republic!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom Molded plastic hairpiece\u003c\/li\u003e\n\u003cli\u003eInjection Molded lowered hood, magnetized half-sleeves\u003c\/li\u003e\n\u003cli\u003eCustom laser-cut Fabric Cloak\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Leg and Arm Detailing\u003c\/li\u003e\n\u003cli\u003eFront-only Torso Pad Printing (excess printing on the back was omitted to reduce product price, as it is covered by the fabric cloak)\u003c\/li\u003e\n\u003cli\u003eCustom pad printed Replica Hands\u003c\/li\u003e\n\u003cli\u003eCustom pad printed head\u003c\/li\u003e\n\u003cli\u003eInk-painted, injection-molded custom plastic lightsaber\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOfficial Trans-green lightsaber blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e. The torso, head, arms, hips, and legs are genuine parts. The hands and custom accessories are molded by \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q3 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42210774712402,"sku":null,"price":69.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/VenZallowHero.png?v=1762914652"},{"product_id":"scorched-subjugator","title":"Scorched Subjugator - Pad Printed Figure Pre-Order","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eScorched Subjugator (Fire Vader), by Cobalt Customs, \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e, and NanoRex Designs.\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003cbr\u003e- 360 degree pad printing\u003cbr\u003e- Custom ABS injection-molded (in steel molds) three-piece black helmet, with detailed decorations and pad-printed elements\u003cbr\u003e- Custom ABS injection-molded (in steel molds) two-piece cracked black helmet, with detailed decorations and pad-printed elements\u003cbr\u003e- Custom ABS injection-molded (in steel molds) shoulder armor, with detailed decorations and pad-printed elements\u003cbr\u003e- Two custom ABS injection-molded (in steel molds) custom capes with detailed decorations and pad-printed elements. One cape has a collar shape.\u003cbr\u003e- A custom injection-molded (in steel molds) lightsaber hilt, with detailed decorations\u003cbr\u003e- A cloth cape and a cloth waist-cape\u003cbr\u003e- One printed head in dark tan\u003cbr\u003e- One printed head in LBG\u003cbr\u003e- Pad printed hands, which will either be printed on official hands or replica ABS hands\u003cbr\u003e- Two official, blank, black hands\u003c\/p\u003e\n\u003cp\u003eThe figure will be printed on official torso, arm, head, hip, and leg parts.\u003c\/p\u003e\n\u003cp\u003eA metallic collector card is also included, and the figure is packaged in a high quality, black metal tin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe estimated shipping time is in 2026\u003c\/strong\u003e. Please be aware that this is an estimate, and the final shipping date may vary. The production is outsourced to trusted manufacturers, but is subject to potential production delays.\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: These are digitally rendered previews, the final product may look different. While we will try to print the yellow, orange and dark red with ink that glow under certain lighting conditions, we cannot guarantee that the ink will glow. The figures do not self-illuminate nor do they \"glow in the dark\".\u003c\/p\u003e\n\u003cp\u003eThese figures are primarily intended for display purposes. Please handle them with care, and do not subject any parts to excessive wear, as that runs the risk of damaging them. Parts might have hairline scratches from assembly or\u003cbr\u003emanufacturing.\u003c\/p\u003e\n\u003cp\u003eThese figures are being produced jointly by\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e and Cobalt Customs. While \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e may supply components for the figures and coordinate shipping, they do not directly handle production of all decorated parts. Please direct any inquiries you might have about the figures or their production to Cobalt Customs. The best way to contact Cobalt Customs is through Instagram DMs; you can find him @cobaltcustombricks.\u003c\/p\u003e\n\u003cp\u003eFinal note: Please add only this item and (optionally) Package Saver to your order. Any other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately. As this product's shipping timeline is different from all other products on the store, we cannot combine its shipment with other products.\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Default Title","offer_id":42229926723666,"sku":null,"price":136.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/CA0EFC8A-0AB1-480E-8658-48F6BA46E302.png?v=1764646607"},{"product_id":"interstellar-warrior-imperial-azure","title":"Imperial Azure Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Imperial Azure Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Blue Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42233313591378,"sku":"FIG-628","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42233313624146,"sku":"FIG-629","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/PrimarisSpaceMarineHero2.png?v=1764963459"},{"product_id":"crimson-messenger-interstellar-warrior-pad-printed-figure-pre-order","title":"Crimson Messenger Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Crimson Messenger Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Red Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42244020863058,"sku":"FIG-633","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42244020895826,"sku":"FIG-634","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/BloodAngel1.png?v=1766033450"},{"product_id":"star-canine-interstellar-warrior-pad-printed-figure-pre-order","title":"Star Canine Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Star Canine Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Sand Blue Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42244022730834,"sku":"FIG-635","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42244022763602,"sku":"FIG-636","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/SpaceWolves1.png?v=1766033550"},{"product_id":"sovereign-knuckle-interstellar-warrior-pad-printed-figure-pre-order","title":"Sovereign Knuckle Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Sovereign Knuckle Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Yellow Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42244022861906,"sku":"FIG-637","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42244022894674,"sku":"FIG-638","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/ImperialFists1.png?v=1766033635"},{"product_id":"shadow-messenger-interstellar-warrior-pad-printed-figure-pre-order","title":"Shadow Messenger Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Sovereign Knuckle Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Dark Green Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42244024991826,"sku":"FIG-639","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42244025024594,"sku":"FIG-640","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/DarkAngel1.png?v=1766033716"},{"product_id":"blackbird-defender-interstellar-warrior-pad-printed-figure-pre-order","title":"Blackbird Defender Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Sovereign Knuckle Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Black Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42244025090130,"sku":"FIG-641","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42244025122898,"sku":"FIG-642","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/RavenGuard1.png?v=1766033773"},{"product_id":"fire-lizard-interstellar-warrior-pad-printed-figure-pre-order","title":"Fire Lizard Interstellar Warrior - Pad Printed Figure PRE-ORDER","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eRender shown for preview purposes. Final product may vary.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eAVFIGURES \u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003eis excited to announce our next pad printed figure pre-order: The Sovereign Knuckle Interstellar Warrior!\u003c\/p\u003e\n\u003cp\u003eThe figure features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection Molded helmet, vambrace, shoulder bells, leg armor, boots, chestplate, power pack, and rifle\u003c\/li\u003e\n\u003cli\u003eInjection Molded modular belt system, which includes 2x pouches, 2x tassets, 1x codpiece, and a swappable \"Battle Vow Seal\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e360° Wrap-around pad printed Undersuit detailing, printed on genuine parts\u003c\/li\u003e\n\u003cli\u003ePad printed helmet and shoulder bell detailing\u003c\/li\u003e\n\u003cli\u003eAVF Customizer Hips\u003c\/li\u003e\n\u003cli\u003e2x Genuine Green Hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis figure will\u003c\/span\u003e\u003cspan\u003e come packaged in a collectible metal tin\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe estimated shipment date is Q4 \u003c\/span\u003e\u003cspan\u003e2\u003c\/span\u003e\u003cspan\u003e0\u003c\/span\u003e\u003cspan\u003e26\u003c\/span\u003e.\u003c\/strong\u003e \u003cspan\u003ePlease be aware that this is an estimate\u003c\/span\u003e\u003cspan\u003e, and the final shipping date may vary\u003c\/span\u003e\u003cspan\u003e. The printing is conducted in\u003c\/span\u003e\u003cspan\u003e-house at \u003cem\u003e\u003cstrong\u003eAVFIGURES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e, but is subject to potential production delays\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease add only this item and \u003c\/span\u003e\u003cspan\u003e(optionally\u003c\/span\u003e\u003cspan\u003e) Package Saver to your order\u003c\/span\u003e\u003cspan\u003e. \u003cstrong\u003eAny other items that are in your cart at checkout will have to split into separate orders, and shipping will be charged separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AV Figures","offers":[{"title":"Single Figure","offer_id":42244032856146,"sku":"FIG-643","price":79.97,"currency_code":"USD","in_stock":true},{"title":"Squad Pack (4x Figures)","offer_id":42244032888914,"sku":"FIG-644","price":251.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2985\/3410\/files\/Salamander1.png?v=1766035160"}],"url":"https:\/\/avfigures.com\/collections\/pre-order\/figures.oembed","provider":"AV Figures","version":"1.0","type":"link"}